Aputure LS 600c Pro II RGB LED Monolight with 46 Built-In Preset Source Effects (A-Mount)

Aputure Light Dome 150

The Light Dome 150 is a 150cm (59in) Bowens Mount QuickSetup Circular Softbox. Its substantial surface area makes it ideal for high-powered Bowens Mount LEDs, such as the Aputure LS 600d Pro or LS 600x Pro. Its 32-sided quick-setup build transforms a hard point-source light into a soft source with perfectly circular reflections in one minute. The Light Dome 150 also includes two diffusion strengths to allow users to fine-tune their intensity and light quality.

Aputure F10 Fresnel

The Aputure F10 Fresnel is made for modular Bowens Mount fixtures. With its wide 250mm (9.84-inch) glass Fresnel, the F10 both immensely intensifies the output of a point-source LED, but also results in a quality of light lighting technicians will find similar to a Tungsten 5K or Studio 2K.

Intensely Bright

The F10 Fresnel functions at its best when paired with the Aputure LS 600d Pro, a 600W Daylight COB LED. Together, this combination eclipses Studio 2K Tungsten lights, and approaches the intensity of 5K Tungsten fixtures at flood. With a combined flood output of 11,440 lux and spot output of 29,300 lux at 3 meters, the 600d Pro and F10 Fresnel even compete on par with higher-powered HMIs.

Dual-Optic Design

The F10 Fresnel matches the unique design of the Fresnel 2X, utilizing a two-stage optical system to maximize light output. Utilizing a rear aspherical focusing element, the F10 Fresnel optimizes the output of an LS 600d Pro to fill the front Fresnel Element, resulting in up to 340% additional output in Flood mode.

Ergonomic Focusing

To ergonomically and precisely adjust its variable 15-45-degree beam angle, the F10 Fresnel uses Aputures helicoid focus design introduced in the Fresnel 2X. This seamless design requires no extra knobs or handles. Simply twist the lens ring, and adjust the spot/flood controls.

Minimized Light Leaks

Building on our experience from the Fresnel 2X, the F10 Fresnel uses an offset ventilation design in its heat-resistant body that allows for airflow while minimizing light leaks.

Impeccable Build

Despite its impressive 250mm (9.84-inch) Fresnel diameter, the F10 Fresnel maintains a compact heat-resistant construction. The shell of the F10 can withstand the heat of the LS 600d Pro, and due to its collapsible, and aspherical focusing lens, it can stow away to a depth of 6.8 inches (172.5mm).

Drop-In Accessory Slot

Another of many firsts, the F10 Fresnel is also the first Bowens Mount Fresnel to feature an industry-standard drop-in accessory slot. This heavy-duty accessory slot allows users to mount the F10 Barn Doors on the Fresnel for proper light shaping, and can even fit a 13-inch (330mm) scrim.

Durable Carrying Bag

Made to follow you onto any film set, the F10 Fresnel comes packed inside a heavy-duty carrying bag for easy travel.

Aputure LS1200d Series Pro Three Bowens Mount Hyper Reflectors Kit with Varying Beam Angles

Aputure F10 Barndoors for LS 600d Fresnel Attachment

The 10-inch F10 Barndoors for the LS 600d Fresnel Attachment from Aputure offer a means to control the 15 to 45 degrees beam spread range of the Fresnel. Simply swing one or more leaves into the beam path to light areas you want and to keep light from areas you don’t want illuminated. The 8-leaf design gives even greater control than 4-leaf versions and provides clean cuts of light.